Semi-auto dry mortar plant ceramic tile adhesive dry mortar
Dry powder mortar production line is the complete equipment plan
provided by our company for the dry powder industry enterprises.
The following is a detailed description of the production line.
The production line mainly uses a gravity-free mixer as its main
equipment. Compared with the common horizontal ribbon mixer, the
gravity-free mixer has the following advantages: 1. The mixing
speed is fast, and it only takes 0.5-2.0 minutes when the CV is 3%.
High mixing uniformity, CV can reach 3%-5%; Segregation is not
obvious, especially when mixing materials with large differences in
density, particle size, etc., satisfactory mixing uniformity can be
obtained; The filling amount can be varied within a range, and the
filling factor is in the range of 0.1--0.7, and a good mixing
effect can be obtained.
The products of our factory have been strictly tested before
leaving the factory. The following items are all qualified after
1. Mixing speed 2min
2. Uniformity cv 3%-5%
3. Discharge speed 10 seconds
4. Equipment noise ≤60dB
5. Work area dust ≤15mg/m²
|Model||Capacity(t/h)||total power||Height||mixer volume||occupied area|
|simple dry mortar plant||1-5||2-20kw||3-4m||2m³||20m²|
|semi-auto dry mortar plant||5-8||20-30kw||6-8m||2m³||50-60m²|
|full automatic dry mortar plant||10-20||60-120kw||8-13m||2m3,3m³, 4m³||60-100m²|
This semi-automatic dry mortar plant can be easily upgraded in an
automatic dry mortar plant in the future, it is sufficient to add a
raw materials storage system, an automatic weighing system and a
Semi automatic dry mortar equipment structure and function:
Such equipment consists of a lifting system, a hybrid system, an
automatic packaging system, a power control system, a pulse dust
removal system, an air pressure system, and a work platform.
1. Lifting system: It consists of feeding port, hoisting machine
and discharging port. Its task is to raise raw materials to the
2. Mixing system: It consists of a mixing chamber to be mixed and a
double-shaft gravity-free mixer. The mixed materials required for
the mixing machine are stored in the mixing chamber, and the mixing
machine continuously mixes the various raw materials continuously.
Automatic batching system: additive batching system
3. Automatic packaging system: It consists of automatic filling
machine and finished silo. The filling machine automatically weighs
the materials in the finished silo into the packaging bag.
4. Additive ingredient system: Its basic function is the same as
above. The main task is to measure the ingredients with less added
amount to complete the combination.
5. Power Control System: Controls the start and stop of solenoid
valves and each motor on the production line.
6. Pulse dust collector: used for collecting and removing dust at
the feeding port to optimize the working environment.
7. Air pressure system: used for air supply of the silo gate, mixer
gate and pulse dust collector.
Application of dry mortar production line:
It is widely used in solid-solid (ie powder and powder) and
solid-pulp in industries such as chemicals, dyes, pigments,
building materials, refractories, rare earths, plastic glass and
Packaging and delivery: